6 TON Diesel Drive Refrigerated Seawater System
6 Ton Super Mini Diesel Drive RSW
This compact and high powered engine is set to impress as part of Kubota’s “Super Mini Series”. The RSW uses a Low Vibration Compressor, PWR Titanium Turbo Chiller, powder coating or two part epoxy marine paint on pulleys and other steel components.
Parts
- COMPRESSOR: UPF200-135-8PK-12V (2 WIRES)COMPRESSOR: UPF200-135-8PK-12V (2 WIRES)-21004-19855135mm 8Groove Pulley, 12V Armature, 2wires - R404A REFRIGERANT *FOR USE WITH 6T DIESEL DRIVE RSW'S AVAILABLE PARTS FOR UPF200-135-8PK-12V COMPRESSOR 1. CLUTCH ASSEMBLY: UP/UX200-135-8PK-12V (2 WIRES) INCLUDES: ARMATURE: UP/UX200 COIL: UP/UX200-12V (2 WIRES) PULLEY: UP/UX200-135-8PK (Special Order with PULLEY: UP/UX200-125-6PK) Clutch Fitting Kit, A GROUP 2. PWRB2130 -- 150 / 170 /200 Compressor Change Kit Compressor Features Unicla 10-cylinder swashplate Suitable for applications with a system capacity requirement of 6-11 kW Displacement: 200 cc/rev Maximum continuous: 6000 rpm Smooth and quiet operation with excellent performance through all rev ranges Clockwise and counterclockwise rotation with no change in volumetric efficiency Heavy duty impressed steel gasket and HNBR Japanese high-temperature O-ring (two-point seal) Forged steel cylinder housing Drop-forged 5050 aluminium pistons with synthetic PTFE heat-treated rings Lip seal with high tolerance to heat and operational fatigue Genuine NSK bearings throughout
- CONDENSER ZINC PLATE- 6 5/8" DiameterReplacement Zinc for condensers that are 6 5/8" diameterPWRB2115 For Unitsmini 5T to 10T Hyd6ton to 10Ton Diesel6ton to 10ton Electric7.5Ton to 10 Ton Belt Drive
- Electrical Service KitAll the right Stuff Pac West Ref 12V Systems
- Jabsco Pump, 1", pedistal mount pump Jabsco 777-9001 Flexible Impeller Pedestal Pump *FOR USE WITH 6TON, 8.5T,10T HYDRAULIC AND DIESEL DRIVE RSW's Jabsco catalog # 777-9001, Bronze Flexible Impeller Pedestal Pump, bare shafted pedestal pump end only without a Motor. Bronze Construction, with a Neoprene Impeller and Mechanical Seal. Ports are 1 Inch NPT Internal. FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Thread Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: 5/8" Diameter Stainless Steel Bearings: Shielded Ball Bearings
- PACER CLUTCH PUMP, I Series Pacer, 2"PACER CLUTCH PUMP, I Series Pacer, 2"*PACER CLUTCH PUMP FOR DIESEL DRIVE RSW WITH BELT DRIVEN PACER PUMPSSKU: PWR-1136 PARTS AVAILABLE FOR PWR-1136 PACER WET END ASSEMBLY DIESEL DRIVE PACER PUMP CLUTCH ASSY. MODIFIED PACER SHAFT AND BEARING KIT Pump Features 316 stainless steel casing fiberglass reinforced polyester, polypropylene, or Ryton® internals Suction lift to 20 ft. (6m) vertical Flow rates: to 170 GPM or 75 ft. TDH (to 650 LPM or 23m TDH) Dual ports 1 1/2" and 2", NPT or BSP Built-in check valve and double flush volute Self-Priming Centrifugal pump- compact, lightweight and provide corrosion resistance and efficient performance for a wide variety of water and corrosive liquids
- PRESSURE CONTROL,12VOLT, RiL SeriesPRESSURE CONTROL, 12VOLT, 0-500, RIL SERIES *FOR USE WITH 3TB.D./3T HYD DRIVE/MINI5T/6T/7.5T/8.5T/10TON/12T/15T/23T HYDRAULIC DRIVE RSW'S - ALL 12VOLT RSW'S PRIOR TO 2020*USE WITH PRESSURE TRANSDUCER,.5-4.5v, 0-500PSISKU:PCT100RIL
- TEMP. CONTROL, 12 VOLT, RiL SERIESTEMP. CONTROL, 12 VOLT, RiL SERIES*REPLACE WITH MT512EL CONTROL AND SB41 SENSOR SKU:UNAVAILABLE
- TEMP. CONTROL, 12V DC, E SERIESTEMP. CONTROL, 12 VOLT DC, E SERIESALL 12 VOLT RSW'S BUILT AFTER 2020 *FOR USE WITH 3TB.D./3T HYD DRIVE/MINI5T/6T/7.5T/8.5T/10TON/12T/15T/23T HYDRAULIC DRIVE RSW'S - ALL 12VOLT RSW'S BUILT AFTER 2020**USE WITH TEMP SENSORSKU:MT512EL