10 TON Hydraulic Refrigerated Sea Water System
10 Ton Models include:
- Up Sized UNICLA COMPRESSOR
- The proven 330cc Compressor Upgraded to a 380cc for faster chilling!
- The "Big Brother" with 50cc more capacity
10T Hydraulic requirements: Less Pressure = Easier Starting (4.88 cu. in. Eaton 420 Piston Pump or equivalent is required to deliver the 15 Gal/min this system needs)
Technical Bulletins
Parts
- 10T HYD. DRIVE CIRC. PUMP PULLEY10T HYD. DRIVE CIRC. PUMP PULLEY 6Groove Poly V Pulley, 3.7"OD PWR-950 PARTS AVAILABLE FOR PWR-950 3/4" Taperlock Bushing
- COMPRESSOR: UXF380-168-8PK-12V (2 WIRES)-HDC COMPRESSOR: UXF380-168-8PK-12V (2 WIRES)-HDC 168mm 8 Groove Pulley, 12V Armature, 2 wire, R404A REFRIGERANT *FOR USE WITH 10TON HYDRAULIC AND DIESEL RSW'S AVAILABLE PARTS FOR UXF380-168-8PK-12V COMPRESSOR 1. CLUTCH ASSEMBLY: UX380-168-8PK-12V (2 WIRES)-HDCINCLUDES: ARMATURE: UX380-HDC COIL: UX380-12V (2 WIRES)-HDC PULLEY: UX380-168-8PK-HDC (Custom Order with PULLEY: UX380-178BB-HDC) Clutch Fitting Kit 330/380 SERIES 2. PWRB2126 - COMPRESSOR CHANGE KIT-UNICLA 330 AND 380 MODELS Compressor Features Unicla 10-cylinder swashplate Suitable for larger commercial applications with a system capacity requirement of 12-16 kW and can be fitted into the same position as a Unicla UX330 or UXF330 Displacement: 380 cc/rev Maximum continuous: 4500 rpm Smooth and quiet operation with excellent performance through all rev ranges Clockwise and counterclockwise rotation with no change in volumetric efficiency Heavy duty impressed steel gasket and HNBR Japanese high-temperature O-ring (two-point seal) Forged steel cylinder housing Drop-forged 5050 aluminium pistons with synthetic PTFE heat-treated rings Lip seal with high tolerance to heat and operational fatigue Genuine NSK bearings throughou
- Condenser Gasket - Zinc End 6 5/8" Dia.Condenser Gasket - 6 5/8" DiameterZinc End- Double GasketPWRB2113 For Units 2016 and Newer 6T to 8.5Ton Hyd Drive / Diesel Drive / Belt Drive10Ton Hyd. Drive and Diesel Drive2012 to 2016 Mini 5Ton Hyd. Drive
- CONDENSER ZINC PLATE- 6 5/8" DiameterReplacement Zinc for condensers that are 6 5/8" diameterPWRB2115 For Unitsmini 5T to 10T Hyd6ton to 10Ton Diesel6ton to 10ton Electric7.5Ton to 10 Ton Belt Drive
- Eaton Hydraulic Motor-10TON HYD DRIVE Eaton Hydraulic Motor, 10T Hyd Drive *FOR USE WITH 10TON HYDRAULIC DRIVE RSW'sSKU:74315-DCW Hydraulic motor features 40.6 CM3/R [2.48 IN3/R] FIXED DISPLACEMENT AXIAL PISTON MOTOR13 TOOTH 16/32 SPLINE, SHAFT 1.0625-12 UN-2B SAE O-RING PORTS - REAR.5625-18 UNF-2B SAE O-RING PORT - UPPER REAR OF UNIT
- Electrical Service KitAll the right Stuff Pac West Ref 12V Systems
- Jabsco Pump, 1", pedistal mount pump Jabsco 777-9001 Flexible Impeller Pedestal Pump *FOR USE WITH 6TON, 8.5T,10T HYDRAULIC AND DIESEL DRIVE RSW's Jabsco catalog # 777-9001, Bronze Flexible Impeller Pedestal Pump, bare shafted pedestal pump end only without a Motor. Bronze Construction, with a Neoprene Impeller and Mechanical Seal. Ports are 1 Inch NPT Internal. FEATURES Pump Body: Bronze Pedestal Port Size: 1" NPT, Internal Thread Flow: Up to 27.9 GPM at 10 feet of head, 2100 RPM. Reduced cam versions have reduced flow. Pressure: Up to 26 PSI Impeller: Neoprene or Nitrile Shaft Seal: Lip Type or Mechanical Face Seal Shaft: 5/8" Diameter Stainless Steel Bearings: Shielded Ball Bearings
- Pacer Pump, Stainless, 8.5T / 10T HYD DRIVEPacer Self-Priming SS Pedestal Water Pump - , 1.5" & 2.0", Female (NPT), 170 GPM *FOR USE WITH 8.5T / 10T HYD DRIVE RSW'SSKU: ISE2GL CSS available parts for pacer pump PWR- Pacer Pump Upgrade Kit For OLD 2009-2012 7.5T HYD. Drive RSW'S pump Features Self-Priming Centrifugal pumps are compact, lightweight and provide corrosion resistance and efficient performance for a wide variety of water and corrosive liquid applications - for chemicals, wastes, acids and other industrial liquids. Also ideal for use in the oil field, aquaculture and agriculture. 316 stainless steel casing fiberglass reinforced polyester, polypropylene, or Ryton® internals Choice of drives: gasoline engine, electric, hydraulic Viton, EPDM or Buna-N elastomers Carbon & ceramic or silicon carbide shaft seals Suction lift to 20 ft. (6m) vertical Flow rates: to 170 GPM or 75 ft. TDH (to 650 LPM or 23m TDH) Dual ports 1 1/2" and 2", NPT or BSP Built-in check valve and double flush volute Close-coupled, long coupled or pedestal mounted
- PRESSURE CONTROL, 12VOLT, E SeriesHI/LO PRESSURE CONTROL, 12VOLT, 0-850, E SERIESALL 12VOLT RSW'S BUILT AFTER 2020 *FOR USE WITH 3TB.D./3T HYD DRIVE/MINI5T/6T/7.5T/8.5T/10TON/12T/15T/23T HYDRAULIC DRIVE RSW'S - ALL 12VOLT RSW'S BUILT AFTER 2020**USE WITH PRESSURE TRANSDUCER,.4-20MA, 0-500PSI, E SERIESSKU:PCT100EL
- PRESSURE CONTROL,12VOLT, RiL SeriesPRESSURE CONTROL, 12VOLT, 0-500, RIL SERIES *FOR USE WITH 3TB.D./3T HYD DRIVE/MINI5T/6T/7.5T/8.5T/10TON/12T/15T/23T HYDRAULIC DRIVE RSW'S - ALL 12VOLT RSW'S PRIOR TO 2020*USE WITH PRESSURE TRANSDUCER,.5-4.5v, 0-500PSISKU:PCT100RIL
- TEMP. CONTROL, 12 VOLT, RiL SERIESTEMP. CONTROL, 12 VOLT, RiL SERIES*REPLACE WITH MT512EL CONTROL AND SB41 SENSOR SKU:UNAVAILABLE
- TEMP. CONTROL, 12V DC, E SERIESTEMP. CONTROL, 12 VOLT DC, E SERIESALL 12 VOLT RSW'S BUILT AFTER 2020 *FOR USE WITH 3TB.D./3T HYD DRIVE/MINI5T/6T/7.5T/8.5T/10TON/12T/15T/23T HYDRAULIC DRIVE RSW'S - ALL 12VOLT RSW'S BUILT AFTER 2020**USE WITH TEMP SENSORSKU:MT512EL